Aluminum Trimet Puts New Anode Baking Furnace into Operation
Trimet Aluminium SE’s aluminum smelter in Hamburg commissioned a new baking furnace for the production of carbon anodes. The aim is to ensure greater energy efficiency.
The new brick-lined ring chamber furnace with 48 chambers replaces an eight-year-old furnace, ensuring greater energy efficiency. A modern firing system also contributes to this, with a gas burner that makes more efficient use of energy while simultaneously producing less emissions. In addition, the furnace integrates optimized materials: the bricks used for the furnace walls are easier to heat, so that considerably less energy is required.
“With the new baking furnace, we will produce even more energy-efficiently in the future. This means that the investment in modern technology is paying off twice for Trimet. We are optimizing the quality and performance of our production while also ensuring that our processes are more sustainable,” says Dr. Andreas Lützerath, member of the Executive Board of Trimet Aluminium SE. Trimet has invested around twelve million euros in the new system.
Carbon anodes are needed for the production of primary aluminum. In fused-salt electrolysis, liquid aluminum is produced from the chemical reaction of the source material aluminum oxide with carbon by means of electric current. The anodes assume the functions of conductor and reactant in this process.
The Trimet plant in Hamburg produces anodes for its own metal production and for the Trimet aluminum smelter in Essen. About 120,000 tons of carbon anodes are fired annually in the anode plant. Petroleum coke mixed with coal tar pitch is made conductive through the thermal firing process in the furnace. In a process lasting 18 days, the 1.6 meter long and nearly 1.2 ton anode bodies are gradually heated up to 1,100° Celsius in the combustion chambers before being cooled down again.
“The new construction of an anode baking furnace during ongoing operation was a technical and logistical challenge that the team mastered with flying colors in record time. We can all be proud of the smooth outcome of the project in just ten weeks. Now we can fully concentrate on production again,” says Dr. Jörg Prepeneit, Trimet plant manager in Hamburg.
Meticulous planning was an important factor, as the engineers and more than 100 bricklayers had to coordinate their work with the ongoing firing process. 9,000 tons totaling more than 1.5 million bricks were used for the new anode baking furnace, including 34 different brick types. Many of these bricks were individually manufactured and fitted into their specific place.
Around 380 employees work at the Trimet plant in Hamburg. They produce about 130,000 tons of primary aluminum and 120,000 tons of carbon anodes annually.